Partnering with WREN, questionnaires are sent to offshore wind energy developers around the world who are involved in environmental monitoring. This page provides contextual project information and highlights environmental monitoring, providing links to available data and reports. Content is updated annually.

Icebreaker Wind

Description

LEEDCo’s Icebreaker Wind project will be the first freshwater wind farm in North America. It will occupy a lease area of 10.082254 km2 and consist of 6 V126-3.45MW turbines. 

Location

Icebreaker Wind will be located 12.8 km off the coast of Cleveland, OH in Lake Erie. It will have a grid connection point of Cleveland Public Power, Lake Road Substation in Cleveland, OH. 

Licensing Information

  • July 2018: OEPA 401 Water Quality Certification Approved 

  • March 2018: ODNR Coastal Zone Consistency Permit Approved 

  • September 2017: USACE Section 408 Permit to Alter, Impact, or Encroach upon a Federal Navigation Project Approved 

  • August 2017: US Army Corps Permits Submitted  

  • February 2017: FAA Determination of No Hazard Approved 

Project Timeline

  • October 2026: Anticipated Power Generation 

  • April:  2026Anticipated Offshore Construction Start 

  • October 2025: Anticipated Onshore Construction Start 

  • August 2022: Ohio Supreme Court ruled in favor of Icebreaker Wind affirming the state permit was correctly granted 

  • February 2017: Icebreaker Windpower Inc Submitted Consent Application 

  • July 2016: Offtake Conditionally Secured 

  • August 2012: US DOE Award 

  • August 2012: Interconnection Application Submitted 

  • January 2011: Site Exclusivity Obtained 

Metadata Documents

Environmental Papers and Reports

Environmental Monitoring: Icebreaker Wind

Phase Stressor & Receptor Design and Methods Results Publications Data
Baseline Bats, Birds Bat and Bird Surveys 
Region-wide next-generation radar analysis was used to assess nocturnal bird and bat migration for spring and fall migratory periods. Aerial avian surveys were conducted over a 2-year period over a large portion of the southcentral Lake Erie basin (includes LEEDCo Icebreaker Wind project area). Boat-based avian visual observation surveys were conducted during the spring and fall 2010 migration periods. A 2017-2018 aerial waterfowl and waterbird survey was conducted. Acoustic bat surveys at land-based (2010) and offshore (2017) locations.  		Complete 
Aerial survey data suggested the only species that may occur in the vicinity of the project area on a consistent basis are: redbreasted merganser, common loon, horned grebe, Bonaparte’s gull, ring-billed, and herring gull. In 2010 onshore surveys, five bat species were detected, including: hoary bat, silver-haired bat, big brown bat, eastern red bat, and little brown bat.  In 2017 offshore surveys, the most commonly identified bat species were:  Eastern red bat, hoary bat, and silver-haired bats.  		EDR 2018, Gordon et al. 2018, Gordon and Erickson 2016, Svedlow et al. 2012, Nations and Gordon 2017, Parker et al. 2018, Stucker et al. 2018

No data publicly available
Baseline Fish Fish Survey 
In 2016, fish surveys were conducted to identify larval and juvenile fish present near the proposed turbine sites. Larval fish were sampled once monthly in May, June, and July of 2016 at three locations. Larval fish were also sampled in 2017. Hydroacoustic monitoring was performed monthly in May through October 2016.  		Complete 
Overall, across all 29 trawls conducted near the proposed turbine sites in 2016, only five larval fish were collected.

There were no larval fish collected in May 2017, four larval fish collected in June, and three in July. Overall, across all 27 trawls, only seven fish were collected.

2016-17 juvenile fish sampling results: primarily white perch, yellow perch, and rainbow smelt, while walleye, goby, and emerald shiner were collected in low numbers. 		Verhamme et al. 2016, LimnoTech 2018, LimnoTech 2017, Parker et al. 2018

No data publicly available
Baseline Invertebrates Benthic Macroinvertebrate Survey
Benthic samples were collected by LimnoTech in conjunction with zooplankton and phytoplankton sampling at three locations (two proposed turbine locations and one reference location) once in May 2016 and once in October 2016. Additional benthos samples were collected in May and October 2017.  		Complete 
All benthos collected in May 2016 fell into three main classes: Bivalvia (aquatic mollusks with a hinged shell such as mussels), Insecta (insects), and Oligochaeta (worms). Most benthos collected in October 2016 fell into the same three groups, though a few crustaceans and nematodes (roundworms) were also collected. The benthos collected in 2017 were consistent with the 2016 samples.  		Parker et al. 2018

No data publicly available
Operations Displacement

Fish 		Fish Monitoring Plan 
This plan is designed to collect physical, nutrient, and biological data at the Icebreaker Wind project site (and relevant reference sites) prior, during, and after construction activities. Survey methods to be used include: hydroacoustic, acoustic telemetry, fixed acoustic, noise assessment, aerial surveys, and substrate mapping.  		Planned 
Results pending  		LimnoTech 2017

No data publicly available